Dns; Connect At Booting - IDVIEW PIV Series User Manual

Mpeg-4 dvr
Table of Contents

Advertisement

-Netmask
A netmask is a 32-bit mask used to divide an IP address into subnets and
specify the networks available hosts. Its value is defined by your network
administrator.
255.255.255.255.
This item allows user to enter the value of the Netmask for the unit. Please
note that to configure the item, DHCP must be set to <OFF>.
-Gateway
Gateway is a node on a network that serves as an entrance to another
network.
Users are allowed to specify the IP address of the gateway or router
associated with this unit. To configure this item, DHCP must be set to
<OFF>.

-DNS

DNS is the abbreviation for "Domain Name Server", which is an Internet
service that translates domain names into IP addresses. Because domain
names are easier to remember.
The item allows user to specify the IP address of the Domain Name
System associated with the unit. To configure this item, DHCP must be set
to <OFF>.
If the server is unavailable when using DHCP, the unit searches for the
network server and boots up more slowly. This network search continues
until it times out.

-Connect At Booting

The unit is allowed to connect to the internet automatically when powered
up. Select <YES> to connect at booting, otherwise select <NO>. The
It
takes
the
form
as
***.***.***.***,
for
example,

Advertisement

Table of Contents
loading

Table of Contents