Table of Contents
Advertisement
5.4.6.3 Purge Event Before
The item is used to delete event video before a specific date. Use LEFT /
RIGHT buttons to move the cursor to next or previous field, ENTER to
select the item and UP / DOWN to adjust the value.
5.4.6.4 Start to Purge
After selecting the video you want to delete or setting the date for deletion,
set this item to <YES> for start the deleting or choose <NO> to cancel.
Sequence Setup
The Sequence Setup menu allows setting the camera sequence schedule
and dwell time for main and call monitor. Select <Sequence Setup> in
Main menu and press ENTER; the menu displays as follows.
1.
1. Main Monitor Dwell 5 Sec
2.
2. Main Monitor Schedule
3.
3. Call Monitor Dwell 5 Sec
4.
4. Call Monitor Schedule
Items in the Sequence Setup menu are described in the
following
5.5.1 Main / Call Monitor Dwell
The Main / Call Monitor can be set to display full screen video of all
installed cameras in sequence. This item is used to set the Main / Call
Monitor dwell time, which is the amount of time elapsed between switching
images. The dwell time is in the range of 1 to 120 seconds. The default
value
5.5.2 Main / Call Monitor Schedule
Sequence Setup
is
subsections.
5
seconds.
Advertisement
Table of Contents
