Configuration; Load Factory Default; Import Configuration - IDVIEW PIV Series User Manual

Configuration

The Configuration menu can be used to restore the default factory
settings, import and export configuration.
Select <Configuration> from the Main menu and press ENTER. The
following menu is displayed.
1. 1. Load Factory Default NO
2. 2. Import Config
3. 3. Export Config
Items in this menu are described in the following subsections.

5.8.1 Load Factory Default

This item is used to load the factory setting; select <YES> to recall the
factory default setup configuration from the read-only memory, or <NO> to
cancel.

5.8.2 Import Configuration

This item allows user to load a unit configuration that was saved in an
external drive. To import a configuration that was previously exported,
make sure the device that saved the configuration is connected to the unit.
Select <Import Config> from the Configuration menu and press ENTER.
The following menu is displayed.
Import Config Config Name Select xxxx-xxxx NO xxx-xx NO
Press UP / DOWN to select one of the listed available configuration files, and choose
<YES> to start import.
Configuration