Hue; Record Setup; Record Mode - IDVIEW PIV Series User Manual

128> to <127>. The default setting is <0>.

5.3.10 Hue

Move the cursor to the item and press ENTER for adjusting the hue of the
camera. Use UP / DOWN buttons to adjust the value.

Record Setup

The following three factors will effect the total record time of PIV
MPEG-4 DVR:
. • HDD capacity
. • Recording Rate (Picture per Second)
. • Image quality settings
The greater the recording rate and the higher the quality setting, the
shorter the recording time. Most of the related factors can be set here in
this submenu.
The Record Setup menu allows user to set recording quality, recording
schedules, and other recording parameters. Administrator's password is
required to access Record Setup menu. In the Main menu, move the
cursor to <Record Setup> and press ENTER. The following menu is
displayed.

1. Record Mode

2. Schedule Setup
3. Preset Config
4. ezRecord Setup
5. Circular
Recording
6. Purge Data
5.4.1 Record Mode
The item is for selecting resolution and recording rate. The relative record
settings, such as preset configuration, will follow the record mode setting.
The options are <720 × 480@30PPS>, <720 × 240@60PPS> and <360 ×
Record Setup
720×240@60PPS
Standard
ON
TM
Series