Table of Contents
Advertisement
4.5.1 Dome Connection
Follow the steps to install dome camera.
.
•
See section 2.4 Rear Panel Connections for RS-485 port pin definition.
.
•
Refer to the following figure. Connect the R+, R- terminals on the dome
camera to the D+, D- terminals on the RS-485 port by RS-485 cable respectively.
4.5.2 Dome Protocol Setup
The Dome Protocol item lists the available dome protocols for
communicating with dome cameras connected to the PIV
DVR. From the Main menu, select <Camera Setup> and press ENTER.
The following menu is displayed.
1.
1. Camera Select
2.
2. Dome Protocol
3.
3. Dome ID
4.
4. Camera Title
5.
5. Covert
6.
6. Termination
7.
7. Brightness
8.
8. Contrast
9.
9. Saturation
10.
10. Hue
NO
NO 0 0 0 0
To configure dome protocol, select a camera first and set the communications protocol
Camera Setup
TM
Series MPEG-4
CH1 None 0
Advertisement
Table of Contents
