Table of Contents
Advertisement
DOME
Press the key to enter dome control mode.
MODE
Press repeatedly to select for wanted main monitor display format. There are three
available view modes: full screen, 4-window (2×2) and 16-window (4×4). Refer to
Section 4.1.1 Viewing Modes for detailed information.
SEQ (Sequence)
Press to start automatic sequencing of the video coming from the installed cameras.
MENU
Press the button to call the OSD setup menu.
ESC
Press to cancel or exit from certain mode or OSD menu without changing the settings
made previously.
ZOOM/ENTER
.
•
In OSD menu or selection interface, press the button to make the
selection or save settings.
.
•
In live full screen view mode, press to view a 2× zoom image; press it
again to exit zoom mode.
CALL
Press to enter call monitor control mode.
PLAY/STOP
Press this button to switch between live image and playback video.
FREEZE
.
•
Press FREEZE while viewing live image, the live video will be frozen. The
date / time information shown on the monitor will continue updating. Press FREEZE
again to return to live mode.
.
•
Press FREEZE while playing the recorded video, the playback video will
be paused. Press LEFT / RIGHT to move the recorded video reverse / forward by single
step. Press FREEZE again to continue playing video.
SEARCH
Advertisement
Table of Contents
