Rec Setting - IDVIEW IV-110CD-SN Installation And Operating Manual

5.1 REC SETTING

This page allows you to set the recording rate and recording quality, and enables you to continue
recording when the disk is full.
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GOTO REC PAGE
REC RATE:
This option is for adjusting the number of pictures recorded every second into a storage disk.
The recording rate controls the frequency at which the number of video pictures can be
recorded.
● For a NTSC unit, there are 11 different recording rates you can select from: 60F/S (60 fields
per second), 30F/S, 20F/S, 12F/S, 5.5F/S, 2.4F/S, 1.22F/S, 0.71F/S, 1 F/4S, 1F/6S, and 1F/8S.
● For a PAL unit, there are 11 different recording rates you can select from: 50F/S (50 fields
per second), 25F/S, 17F/S, 10F/S, 5.5F/S, 2.9F/S, 1.52F/S, 0.88F/S, 1 F/4S, 1F/6S, and 1F/8S.
Please refer to the table in section 4.1 for details.
NOTE: The 60 f/s (50 f/s for a PAL unit) recording rate can only function in a 352x240 (352x288
for a PAL unit) resolution
REC QUALITY:
This option determines the image quality to be recorded. The DVR stores images in the
compressed format and allows the image quality to be altered by the image size. There are 4
levels of image quality you can select from: BEST, HIGH, STANDARD, and BASIC. Selecting
the BEST image for use provides higher-resolution recorded images, and normally takes up
more storage space than a HIGH, STANDARD or BASIC image does.
DISK FULL:
This option determines the way to utilize storage media in case of a full disk.
REWRITE: When the hard-disk is full, the device continues recording by displacing the old data.
STOP: When the hard-disk is full, the device will stop recording.
REC SETTING
REC RATE
REC QUALITY
DISK FULL
AUDIO
MULTIPLEXER
MAIN PAGE
SET REC RATE
34
: 20 F/S
: BEST
: REWRITE
: OFF
: ON