Channel Select; Video Loss Detect; Motion Detect; Detection Configuration - IDVIEW PIV Series User Manual

5.6.4.1 Channel Select

The item is used to select a desired channel for setting the parameters.
Move the cursor to <Channel Select> and press ENTER, then select a
channel using UP / DOWN buttons. Press ENTER again to confirm the
setting.

5.6.4.2 Video Loss Detect

This item allows user to enable / disable Video Loss as an alarm event.
Select <ON> to enable Video Loss alarm events, <OFF> to disable. The
default

5.6.4.3 Motion Detect

Use to enable or disable the motion detection function of the PIV
MPEG-4 DVR. By default, the value is <OFF>.
If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.

5.6.4.4 Detection Configuration

If motion detection function is enabled, it is required to define the motion
detection parameters such as detection area and sensitivity settings.
Select a channel for setting the parameters, move the cursor to <Detection
Config>, and press ENTER. The Detection Configuration menu displays
as follows.
setting is
TM
<ON>.
Series