Connect-Disconnect - Panasonic KX-TAW848 Programming Manual

2.3 Connect
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate
Modem Initialize
2.3.6 Connect—Disconnect
Closes the connection between the Maintenance Console and the PBX. When this option is chosen,
system data is automatically backed up from the PBX to the SD memory card (see 2.4.1 Tool—SD
memory backup).
To disconnect
1.
From the Connect menu, select Disconnect.
A confirmation message will be displayed.
2.
Click Yes.
36 PC Programming Manual
Values
1-9, 0, *, #, "," [comma],
T, P, W
Auto(Tone),
Auto(Pulse), Manual
–
COMx
1200bps, 2400bps,
4800bps, 9600bps,
19200bps, 38400bps
–
Description
Enter the telephone number to be dialed to
access the PBX.
T: Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done with
a connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port assigned
to the PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialize command, and click
Initialize to send the command to the modem.
For more details, refer to your modem's
instruction manual.