Table of Contents
Advertisement
Workstation 5 Troubleshooting
Operational Troubleshooting
A WS5 running Windows Embedded CE will use a 256M USB
Flash Drive, a single 256M DIMM, and a 256M CF Card. From the
menu, select "Reset CMOS to WINCE defaults," and press [Enter].
Select 'Y' to confirm and restart the unit.
You should enter BIOS Setup and program the Time and Date
o
fields.
If the unit refuses to boot after performing the above procedure, the
system board and or USB Flash Drive is defective.
Workstation 5 Field Service Guide
3-7
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Workstation 5 and is the answer not in the manual?
Questions and answers