Micros Systems Workstation 5 Service Manual page 107

Diagnostic Version
This field displays the WS5DiagUtility Software Version.
WinCE Version
This field reports the Windows Embedded CE 6 Build Number.
MICROS Build Version
The MICROS Build version represents the combination of the Windows
Embedded CE image and internal drivers. Note: The 'G' is an abbreviation
for 'Greenbelt' the internal project name for the Workstation 5. The
MICROS Build Version increments when the following occurs:
A Windows CE internal driver is added, removed, or modified.
o
Updates, Hotfixes and QFEs applied to any component of Windows
o
Embedded CE 6.0.
CAL Version
This field displays the version of CAL client residing on the Workstation.
LXBEEP.DLL Version
This driver allows POS applications to access the system board beeper
while Windows Embedded CE 6.0 is running. At boot time, the BIOS
controls the beeper.
LXPOWER.DLL Version
This driver helps manage power button events while the operating system
is running. In addition, applications such as the CAL call upon this driver
to force a restart of the workstation during an application download or
platform upgrade.
UWS4.DLL Version
This field contains the WS5 API, or Application Programming Interface.
POS applications use the API to access POS hardware such as cash
drawers, Mag Stripe Reader, and the LCD Customer Display.
LED.DLL
This driver controls the Operator LED blink rate when the OS is running.
At start-up, the LED blinks once per second, then turns solid Blue as the
operating system starts and loads this file.
E2PROM.DLL Version
This driver provides access to the system board serial EEPROM that is
used to store information such as the system board serial number reported
on the System Information Screen.
Workstation 5 Field Service Guide
Workstation 5 Troubleshooting
WS5 Diagnostic
3-39