Lenovo x3550 M4 Installation And Service Manual page 583

2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v Latest level of BMC/IMM
201-860-001 Standalone Memory Test Aborted
Explanation: No OEM0 type 1 found.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
v IBM Support Website
Latest level of DSA
v
Latest level of BMC/IMM
v
201-860-002 Standalone Memory Test Aborted
Explanation: No OEM0 type 1 found.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
201-860-001 • 201-861-000
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v Latest level of BMC/IMM
201-860-003 Standalone Memory Test Aborted
Explanation: No OEM0 type 1 found.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
v IBM Support Website
Latest level of DSA
v
Latest level of BMC/IMM
v
201-861-000 Standalone Memory Test Aborted
Explanation: No SRAT type 1 found.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Appendix C. DSA diagnostic test results
565