Cabling Dvd Drive - Lenovo x3550 M4 Installation And Service Manual

Hide thumbs Also See for x3550 M4:

Table of Contents

Figure 102. SPECpower cable connection

Cabling DVD drive

The internal routing and connectors for the DVD drive.

1. To disconnect the optional optical drive cable, you must first press the

connector release tab, and then disconnect the cable from the connector on the

system board. Do not disconnect the cable by using excessive force.

2. Follow the optical drive cable routing as the illustration shows. Route the cable

from the connector on the system board along PCI assembly 1. Do not bend the

cable under PCI assembly 1.

3. Make sure that the cable is not pinched and does not cover any connectors or

obstruct any components (for example, the ServeRAID adapter or PCI assembly

1) on the system board.

Chapter 6. Removing and replacing components