Lenovo x3550 M4 Installation And Service Manual page 387

2. If the problem persists, (trained technician only)
replace the system board (see Removing the system
board and Installing the system board).
80070219-0701ffff Sensor [SensorElementName] has
transitioned to critical from a less severe
state. (SysBrd Fault)
Explanation: This message is for the use case when an
implementation has detected a Sensor transitioned to
critical from less severe.
May also be shown as 800702190701ffff or
0x800702190701ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Check for an error LED on the system board.
2. Check the system-event log.
Check for the system firmware version and update
3.
to the latest version. Important: Some cluster
solutions require specific code levels or coordinated
code updates. If the device is part of a cluster
solution, verify that the latest level of code is
supported for the cluster solution before you update
the code.
4. Unplug and restore AC power cord, then, perform
step 1 and 2 again.
5. If problems still occurred, (trained technician only)
replace the system board.
8007021b-0301ffff Sensor [SensorElementName] has
transitioned to critical from a less severe
state. (CPU 1 QPILinkErr)
Explanation: This message is for the use case when an
implementation has detected a Sensor transitioned to
critical from less severe.
May also be shown as 8007021b0301ffff or
0x8007021b0301ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Check for a server firmware update.
80070219-0701ffff • 80070301-0301ffff
2. Make sure that the installed microprocessors are
compatible.
3. Make sure the microprocessor 2 expansion board is
installed correctly (see Installing the microprocessor
2 expansion board).
4. (Trained technician only) Replace microprocessor 2.
5. (Trained technician only) Replace microprocessor 2
expansion board.
8007021b-0302ffff
Explanation: This message is for the use case when an
implementation has detected a Sensor transitioned to
critical from less severe.
May also be shown as 8007021b0302ffff or
0x8007021b0302ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response:
Check for a server firmware update.
1.
Make sure that the installed microprocessors are
2.
compatible.
Make sure the microprocessor 2 expansion board is
3.
installed correctly (see Installing the microprocessor
2 expansion board).
(Trained technician only) Replace microprocessor 2.
4.
(Trained technician only) Replace microprocessor 2
5.
expansion board.
80070301-0301ffff
Explanation: This message is for the use case when an
implementation has detected a Sensor transitioned to
non-recoverable from less severe.
May also be shown as 800703010301ffff or
0x800703010301ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0524
SNMP Trap ID: 0
Automatically notify Support: No
Appendix A. Integrated management module II (IMM2) error messages
Sensor [SensorElementName] has
transitioned to critical from a less severe
state. (CPU 2 QPILinkErr)
Sensor [SensorElementName] has
transitioned to non-recoverable from a
less severe state. (CPU 1 OverTemp)
369