Lenovo x3550 M4 Installation And Service Manual page 352

40000010-00000000 • 40000014-00000000
40000010-00000000 Security: Userid: [arg1] had [arg2]
login failures from WEB client at IP
address [arg3].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from a web browser.
May also be shown as 4000001000000000 or
0x4000001000000000
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0016
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1. Make sure that the correct login ID and password
are being used.
2. Have the system administrator reset the login ID or
password.
40000011-00000000 Security: Login ID: [arg1] had
[arg2] login failures from CLI at [arg3].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from the Legacy CLI.
May also be shown as 4000001100000000 or
0x4000001100000000
Severity: Warning
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0017
SNMP Trap ID: 30
Automatically notify Support: No
User response: Complete the following steps until the
problem is solved:
1. Make sure that the correct login ID and password
are being used.
2. Have the system administrator reset the login ID or
password.
40000012-00000000 Remote access attempt failed.
Invalid userid or password received.
Userid is [arg1] from WEB browser at IP
address [arg2].
Explanation: This message is for the use case where a
remote user has failed to establish a remote control
session from a Web browser session.
334
System x3550 M4 Type 7914: Installation and Service Guide
May also be shown as 4000001200000000 or
0x4000001200000000
Severity: Info
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0018
SNMP Trap ID: 30
Automatically notify Support: No
User response: Make sure that the correct login ID
and password are being used.
40000013-00000000 Remote access attempt failed.
Invalid userid or password received.
Userid is [arg1] from TELNET client at
IP address [arg2].
Explanation: This message is for the use case where a
user has failed to log in to a Management Controller
from a telnet session.
May also be shown as 4000001300000000 or
0x4000001300000000
Severity: Info
Alert Category: System - Remote Login
Serviceable: No
CIM Information: Prefix: IMM and ID: 0019
SNMP Trap ID: 30
Automatically notify Support: No
User response: Make sure that the correct login ID
and password are being used.
40000014-00000000 The [arg1] on system [arg2]
cleared by user [arg3].
Explanation: This message is for the use case where a
Management Controller Event Log on a system is
cleared by a user.
May also be shown as 4000001400000000 or
0x4000001400000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0020
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is
required.