Lenovo x3550 M4 Installation And Service Manual page 577

1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
v Latest level of BMC/IMM
201-824-000 Standalone Memory Test Aborted
Explanation: Node Interleave feature must be OFF. Go
to Setup and disable Node Interleave option and then
re-run the test.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
v Latest level of DSA
Latest level of BMC/IMM
v
201-824-001 Standalone Memory Test Aborted
Explanation: Node Interleave feature must be OFF. Go
to Setup and disable Node Interleave option and then
re-run the test.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
201-824-000 • 201-824-003
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
201-824-002 Standalone Memory Test Aborted
Explanation: Node Interleave feature must be OFF. Go
to Setup and disable Node Interleave option and then
re-run the test.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
3. Turn off the system and disconnect it from power.
Wait for 45 seconds. Reseat DIMM(s). Reconnect it
to power.
4. Make sure that DSA and BIOS/uEFI are at the latest
level.
Related Links:
IBM Support Website
v
v Latest level of DSA
Latest level of BMC/IMM
v
201-824-003 Standalone Memory Test Aborted
Explanation: Node Interleave feature must be OFF. Go
to Setup and disable Node Interleave option and then
re-run the test.
Severity: Warning
Serviceable: No
Recoverable: No
Automatically notify Support: No
User response: Complete the following steps:
1. Perform the actions mentioned one at a time and
try the test after each action.
2. If the problem remains, contact your
technical-service representative.
Appendix C. DSA diagnostic test results
559