Lenovo x3550 M4 Installation And Service Manual page 487

816f000d-0400ffff The Drive
[StorageVolumeElementName] has been
removed from unit
[PhysicalPackageElementName]. (Drive
0)
Explanation: This message is for the use case when an
implementation has detected a Drive has been
Removed.
May also be shown as 816f000d0400ffff or
0x816f000d0400ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive
number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID
controller firmware are at the latest level.
4. Check the SAS cable.
816f000d-0401ffff The Drive
[StorageVolumeElementName] has been
removed from unit
[PhysicalPackageElementName]. (Drive
1)
Explanation: This message is for the use case when an
implementation has detected a Drive has been
Removed.
May also be shown as 816f000d0401ffff or
0x816f000d0401ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive
number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID
controller firmware are at the latest level.
816f000d-0400ffff • 816f000d-0403ffff
4. Check the SAS cable.
816f000d-0402ffff
Explanation: This message is for the use case when an
implementation has detected a Drive has been
Removed.
May also be shown as 816f000d0402ffff or
0x816f000d0402ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
1. Reseat hard disk drive n.(n = hard disk drive
number). Wait 1 minute or more before reinstalling
the drive.
2. Replace the hard disk drive.
3. Make sure that the disk firmware and RAID
controller firmware are at the latest level.
4. Check the SAS cable.
816f000d-0403ffff
Explanation: This message is for the use case when an
implementation has detected a Drive has been
Removed.
May also be shown as 816f000d0403ffff or
0x816f000d0403ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 5
Automatically notify Support: No
User response:
Reseat hard disk drive n.(n = hard disk drive
1.
number). Wait 1 minute or more before reinstalling
the drive.
Replace the hard disk drive.
2.
Appendix A. Integrated management module II (IMM2) error messages
The Drive
[StorageVolumeElementName] has been
removed from unit
[PhysicalPackageElementName]. (Drive
2)
The Drive
[StorageVolumeElementName] has been
removed from unit
[PhysicalPackageElementName]. (Drive
3)
469