Lenovo x3550 M4 Installation And Service Manual page 389

1. Check power supply n LED.
2. Replace power supply n. (n = power supply
number)
80070608-0a02ffff Sensor [SensorElementName] has
transitioned to non-recoverable.
Explanation: This message is for the use case when an
implementation has detected a Sensor transitioned to
non-recoverable.
May also be shown as 800706080a02ffff or
0x800706080a02ffff
Severity: Error
Alert Category: Critical - Power
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response: If the specified sensor is PS n 12V OC
Fault, complete the following steps until the problem is
solved:
1. Use the IBM Power Configurator utility to
determine current system power consumption. For
more information and to download the utility, go to
http://www-03.ibm.com/systems/bladecenter/
resources/powerconfig.html.
2. Follow actions in "Power Problems and Solving
Power Problems".
If the specified sensor is PS n 12V OV Fault, complete
the following steps until the problem is solved:
1. Check power supply n LED.
2. Remove the failing power supply.
3. (Trained technician only) Replace the system board.
(n = power supply number)
If the specified sensor is PS n 12V UV Fault, complete
the following steps until the problem is solved:
Check power supply n LED.
1.
Remove the failing power supply.
2.
3. Follow actions in "Power Problems and Solving
Power Problems".
4. (Trained technician only) Replace the system board.
(n = power supply number)
If the specified sensor is PS n 12Vaux Fault, complete
the following steps until the problem is solved:
1. Check power supply n LED.
2. Replace power supply n. (n = power supply
number)
80070608-0a02ffff • 80080128-2101ffff
80070614-2201ffff
Explanation: This message is for the use case when an
implementation has detected a Sensor transitioned to
non-recoverable.
May also be shown as 800706142201ffff or
0x800706142201ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Update the server firmware (see Recovering the
server firmware).
2. If the problem persists, (trained technician only)
replace the system board (see Removing the system
board and Installing the system board).
8008010f-2101ffff
Explanation: This message is for the use case when an
implementation has detected a Device was inserted.
May also be shown as 8008010f2101ffff or
0x8008010f2101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0536
SNMP Trap ID:
Automatically notify Support: No
User response: No action; information only.
80080128-2101ffff
Explanation: This message is for the use case when an
implementation has detected a Device was inserted.
May also be shown as 800801282101ffff or
0x800801282101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
Appendix A. Integrated management module II (IMM2) error messages
Sensor [SensorElementName] has
transitioned to non-recoverable. (TPM
Phy Pres Set)
Device
[LogicalDeviceElementName] has been
added. (Phy Presence Jmp)
Device
[LogicalDeviceElementName] has been
added. (Low Security Jmp)
371