Cabling The Mediant 2000; Figure 2-4: Mediant 2000 Rear Panel Cabling (16 Trunks, Ac Power) - AudioCodes Mediant 2000 Installation Manual

Fast Track Installation Guide
Users assembling the rear brackets by themselves should note the following:
•
•
To place the device on a 19-inch rack's shelf take these 2 steps:
1. Place the device on the shelf.
2. You're now recommended to take the optional steps of fastening the device to the frame of
the rack (as described above) while it is placed on the shelf, so preventing it from sliding
when inserting cables into connectors on the rear panel.
2.3

Cabling the Mediant 2000

The Mediant 2000 is available in all configuration combinations, i.e., AC or DC, in the 16-trunk, 8-
trunk, 4-trunk, 2-trunk or 1-trunk device. The 16-trunk dual AC
(Figure 2-5) configuration combinations are illustrated here as representative.

Figure 2-4: Mediant 2000 Rear Panel Cabling (16 Trunks, AC Power)

Two Category 5 LAN cables,
connected to the Ethernet 1
and 2 RJ-45 ports
Version 4.4
The distance between the screws on each bracket is 26.5 mm.
To attach the brackets, use 4-40 screws with a maximal box penetration length of
3.5 mm.
Two 50-pin Telco
connector cables, each
supporting 8 trunks
(Figure
Grounding
screw
9
2. Installing the Mediant 2000
2-4) and the 8-trunk DC
Dual AC power
cables
August 2004