Disassembly/Assembly - Canon iR8500 Service Manual

Hide thumbs Also See for iR8500:

Table of Contents

6.3 Disassembly/Assembly

The mechanical characteristics of the machine are as described herein; assemble/assemble

the machine as instructed and with the following in mind:

Before starting any disassembly/assembly work, turn off the main power switch,

and disconnect the power plug.

2. Unless otherwise specifically instructed, assemble the machine by reversing the steps

used to disassemble it.

3. Identify the screws by type (length, diameter) and location.

4. To protect against static charge, one of the mounting screws of the rear cover comes

with a toothed washer. Be sure not to leave out the washer when assembling the ma-

5. To ensure electrical continuity, the mounting screw for the grounding wire and the varis-

tor comes with a washer. Be sure not to leave out the washer when assembling the ma-

6. As a rule, do not operate the machine with any of its parts removed.

7. When sliding out the duplex feeder unit or the fixing assembly, be sure to turn off the

front cover switch or the power switch.

2000 2000 2000 2000

CANON iR8500/7200 REV.1 AUG. 2001

CHAPTER 2 NEW FUNCTIONS

Show Quick Links

Table of Contents