After Replacing The High-Voltage Dc Pcb - Canon iR8500 Service Manual

2.7.8 After Replacing the High-Voltage DC PCB

1) Replace the high-voltage DC PCB.
2) Assemble the machine; then, connect the power plug to the power outlet, and turn on the
main power switch.
3) Enter the values (4 types) indicated on the label on the new high-voltage DC PCB in ser-
vice mode.
4) Turn off and then on the main power switch.
COPYRIGHT© 2001 CANON INC.
COPIER
COPIER
COPIER
COPIER
F06-207-05
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 6 TROUBLESHOOTING
> >
ADJUST DEVELOP
> > >
ADJUST HV-SP HVT-SP
> > >
ADJUST HV-TR HVT-TR
> > >
ADJUST HV-TR H-PRE-TR
>
HVT-DE
6-49