Canon iR8500 Service Manual page 789

ERROR CODE
E302
(iR7200)
Main Cause The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open cir-
cuit). The reader controller PCB is faulty.
Condition
0001 During shading, the reader controller PCB does not end shading in
0002 In stream reading, the edge white accumulation (processing) does
E315
(Indicated if iR8500)
Main cause The reader controller PCB is faulty. The main controller PCB is faulty.
Condition
0000 During image rotation, encoding/decoding has a fault.
E320
(Indicated if iR8500)
Main cause The CCD/AP PCB is faulty. The wiring is faulty (short circuit, open cir-
cuit). The reader controller PCB is faulty.
Condition
0000 When reading an image, no image read end communication from
E-14
1 sec.
not end after a period of 10 secs.
the CCD/AP PCB arrives at the reader controller PCB within 60
secs.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001