Canon iR8500 Service Manual page 196

b. Removing the Vertical Path Roller 2
1) Slide out the deck (right) and the caste
3/4.
2) Remove the 3 screws [1], and detach the
right lower front cover [2].
3) Disconnect the connector [1] and the
screw [2]; then, detach the guide plate
[3].
4) Remove the E-ring [1] at the front of
the roller shaft, and move the bearing
[2] toward the inside; then, detach the
vertical path roller 2 [3].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[1]
[1]
F02-805-15
[1]
F02-805-16
[1]
[2]
F02-805-17
[1]
[2]
[2]
[3]
[3]
2-141