Canon iR8500 Service Manual page 414

5) Adjust the image front margin for each source of paper as follows:
Select '1' (right deck) by making the following selections: COPIER>TEST>PG-PICK.
Then, generate output by making the following selections to adjust the image front mar-
gin: COPIER>TEST>PG65.
Likewise, select '2', '3', and '4' by making the following selections:
COPIER>TEST>PG-PICK. Then, generate output by making the following selections,
and adjust the image front margin: COPIER>TEST>PG5.
Standard: 2.5 ±1.5 mm
PG-PICK 1: right deck
PG-PICK 2: left deck
PG-PICK 3: cassette 3
PG-PICK 4: cassette 4
adjustment: by adjusting the fixed position of each source of paper.
Front Deck (left/right)
1) Slide out the deck, and loosen the four
screws [2] and the two fixing screws [3]
of the cassette front cover [1].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 6 TROUBLESHOOTING
F06-201-04
[2]
[3]
[2]
F06-201-05
+
2.5 1.5mm
[3]
[2]
[1]
6-11