Canon iR8500 Service Manual page 698

<LAMP> (Indicated if iR8500)
Use it to adjust the voltage used to turn on the scanning lamp.
L-DATA
Use it to enter scanning lamp intensity data.
Range of
adjustment 0 to 1023
• A higher setting increases the intensity.
• A lower setting decreases the intensity.
If a faulty image is generated after execution of
COPIER>FUNCTION>CCD>CCD-ADJ, enter the setting indicated on the
service label.
<AE>
Use it to adjust AE.
AE-TBL
Use it to adjust the density of characters for image density adjustment.
Range of
adjustment 1 to 9; default: 5
COPYRIGHT© 2001 CANON INC.
Copy density
White
A higher setting generates darker characters.
A lower setting generates lighter characters.
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
White
Original density
F00-203-02
SERVICE MODE
COPIER>ADJUST
S-55