Removing The Copyboard Cover Sensor - Canon iR8500 Service Manual

3.9.12 Removing the Copyboard Cover Sensor

1) Remove the reader rear cover (See
10.4.1.h.).
2) Remove the three screws [1], and detach
the fuse PCB base [2].
3) Disconnect the connector [1], and re-
move the screw [2]; then, detach the
copyboard cover sensor cover [3] and
the copyboard cover sensor [4].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[1]
F02-309-22
[3]
[2] [4]
F02-309-23
[2]
[1]
2-69