Canon iR8500 Service Manual page 258

g. Removing the System Fan (FM16)
1) Remove the rear cover (See 10.4.1.e.).
2) Disconnect the connector [1].
3) Remove the 2 screws [2], and detach the
system connector cover [3].
4) Remove the main controller box cover.
5) Disconnect the connector [1], and re-
move the 2 screws [2]; then, detach the
system fan [3].
When mounting the fan, be sure
that the direction of air current
is as indicated by the arrow.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[2]
F02-1004-46
[1]
[3]
F02-1004-47
[3]
[1]
[2]
2-203