Canon iR8500 Service Manual page 87

CHAPTER 2 NEW FUNCTIONS
g. Removing the Original Orientation Detection PCB
1) Remove the reader controller cover (See
2.9.4.h.).
2) Remove the 3 screws [1], and remove
the original orientation detection PCB
[2] in the direction of the arrow.
h. Removing the Reader Controller PCB Unit
1) Remove the reader controller cover (See
2.9.4.h.).
2) Disconnect the 8 connectors of the
reader controller PCB, DDIS cable, and
2 flexible cables.
3) Remove the 8 screws [1], and detach the
reader controller PCB unit [2].
2-32
COPYRIGHT© 2001 CANON INC.
[1] [2]
F02-209-32
[1]
[1]
[2]
F02-209-33
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[1] [1]
[1]
[1]
[1]
[1]