Canon iR8500 Service Manual page 89

CHAPTER 2 NEW FUNCTIONS
b. Removing the Original Size Sensor 3/4
1) Remove the copyboard glass (See
2.9.1.a.).
2) Move the No. 1 mirror base to the left
edge.
3) Remove the screw, and disconnect the
connector [2]; then, detach the original
size sensor unit (rear) [3].
4) Disconnect the connector [1] (1 pc.
each), and detach the original size sen-
sor 3/4 [2].
2-34
COPYRIGHT© 2001 CANON INC.
[1]
F02-209-36
[2]
F02-209-37
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
[3]
[2]
[1]