Canon iR8500 Service Manual page 653

SERVICE MODE
COPIER>DISPLAY
<ACC-STS>
Indicates the connection of an accessory.
FEEDER
Indicates the connection of an ADF (0: no, 1; yes).
SORTER
Indicates the connection of a finisher and a puncher unit.
XY
X = 0: no finisher, 1: finisher, 2: saddle finisher,
Y = 0: no puncher unit, 1: 2-hole, 2: 2/3-hole, 3: 4-hole (FRN),
DECK
Indicates the connection of a paper deck (accessory) (0: no, 1: yes).
CARD
Indicates the presence/absence of a card reader (if no card reader is in-
stalled, '1' is indicated) (0: no, 1: yes).
DATA-CON
Indicates the connection of a self diagnostic device (0: no, 1: copy data con-
troller, 2: NE controller).
RAM
Indicates the memory size of the main controller (192 MB).
NIB
Indicates the connection of a network interface board. (0: no, 1: Ether
board, 2: Token Ring, 3: both)
LIPS-RAM
Indicates the memory size of the LIPS board (xx MB).
LIPS
Indicates the connection of a LIPS board (0: no, 1: yes).
PS/PCL
Indicates the connection of the PS/PCL (0: no, 1: PS/PCL, 2: PS kanji).
RIP1
Not used.
S-10
3: saddle finisher inserter,
4: saddle finisher + paper folding unit,
5: saddle finisher + inserter + paper folding unit;
4: 4-hole (SWDN)
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001