Canon iR8500 Service Manual page 340

No.
4 Open the right upper cover, and slide the
small face cover [1] to the rear to detach;
then, detach the large face cover [2].
Fit the grip [3] detached in step 3 at the
front.
Close the right upper cover.
5 Holding the grips on the pickup side
(front, rear) for the copier, lift the machine
slightly to remove the pad [1].
At this time, move the plastic bag [2]
toward the remaining pad.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[1]
[2]
F04-302-04
[2]
F04-302-05
[3]
[1]
4-39