Canon iR8500 Service Manual page 180

9) Fit the cushion to the front of the charg-
ing wire (except for primary charging
assembly).
10) Mount the shielding plate (left, right).
For other charging assemblies,
fit the lid (2 pc.).
After stringing the charging
wire of each charging assembly,
check to make sure that the
length of the tension spring is as
follows:
Primary
charging
A=12.0±1mm
assembly
Pre-transfer
charging
A=12.0±1mm
assembly
Transfer
charging
A=12.0±0.5mm
assembly
Separation
charging
A=12.0±0.5mm
assembly
11) Mount the wire cleaner. At this time,
pay attention to the orientation of the
wire cleaner.
12) Wipe the charging wire with lint-free
paper moistened with alcohol.
COPYRIGHT© 2001 CANON INC.
A
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
2-125