CHAPTER 4 INSTALLATION
2.10 Cassette
No.
1
Go through the following
steps only if Inch-configured
paper is not going to be used.
Press the releasing buttons of cassettes 3
and 4, and slide out the cassettes to
remove the packing material.
2
Set the side guide plate [1] of cassettes 3
and 4 into the hole (A4/A3) identified by
the marking M.
Fit the non-Inch tab [2] that comes with
the machine into the hole identified by the
following marking, making sure that it
will not be pushed up from inside the
cassette:
A:STMT-R
H:LTR-R
4-26
Work
COPYRIGHT© 2001 CANON INC.
Checks/remarks
[2]
[1]
F04-210-01
2000 2000 2000 2000
CANON iR8500/7200 REV.1 AUG. 2001
A
H