Canon iR8500 Service Manual page 368

No.
4 [When Installing a Copy Data Controller-
A1 to a 230V Model]
Remove the connector fixing screw
(bottom) [1].
Bend the terminal of the grounding wire
[2] that comes with the machine to the
outside, and mount it using a connector
fixing screw [1].
5 Connect the connector J525 [1] of the host
machine and the cable [3] of the
controller.
COPYRIGHT© 2001 CANON INC.
Work
2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 4 INSTALLATION
Checks/remarks
[2]
[1]
F04-601-04
[2]
F04-601-05
[1]
[1]
4-67