Canon iR8500 Service Manual page 220

10) Remove the C-ring [1] at the rear, and
remove the electrode plate [2], spacer
[3], bearing [4], and bushing [5].
b. Mounting the Fixing Upper Roller
Mount the upper roller by reversing the
steps used to remove it.
a. To prevent the surface of the
roller from dirt or damage,
wrap paper after removing it.
b. Be sure that the longer cut-
off A shown in F02-909-21
is toward the rear.
c. When mounting, clean the
electrode plate [1] and the
electrode terminal [2].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[5]
[4]
F02-909-20
F02-909-21
[2]
F02-909-22
[3]
[2]
[1]
A
[1]
2-165