Canon iR8500 Service Manual page 805

ERROR CODE
• Copier (E601-E830)
E601
Main cause The wiring is faulty (short circuit, open circuit). The hard disk drive is
faulty. The DC controller PCB is faulty. The main controller PCB is faulty.
Condition
0000 For image transmission between the main controller PCB and the
E602
Main cause The wiring is faulty (short circuit, open circuit, disconnection). The in-
stalled system file is faulty. The hard disk drive is faulty. The main control-
ler PCB is faulty.
Condition
0001 A fault is detected in the mounting of the hard disk when the sys-
0002 The appropriate system file cannot be found on the hard disk when
0003 A sector error occurs on the hard disk when the system on the hard
E604
Main cause The image memory is faulty. The main controller PCB is faulty.
Condition
0000 An error occurs in image memory.
E605
Main cause The battery for image memory is faulty. The main controller PCB is faulty.
Condition
0000 A fault is detected in the voltage of the battery for image memory.
E-30
hard disk drive, the main controller PCB detects an error in the
control information. Or, for image transmission between the main
controller PCB and the DC controller PCB, the DC controller PCB
detects an error in the control information.
tem on the hard disk is started up using the BOOT ROM.
the system on the hard disk is started using the BOOT ROM.
disk is started up using the BOOT ROM.
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001