Canon iR8500 Service Manual page 250

d. Removing the Control Panel PCB and the LCD Panel
1) Remove the control panel lower cover.
• Removing the Control Panel Case
(iR8500)
2) Remove heater 4 screws [1], and detach
the control panel case [2].
• Removing the Control Panel Case
(iR7200)
2) Remove the 2 screws [1], and detach the
control panel bracket (right) [2].
3) Remove the 3 screws [3], and lift the
front of the control panel case [4].
A sheet [5] is attached to the
control panel case; take care not
to detach or bend the sheet.
4) Remove the control panel. CPU PCB
and the control panel inverter PCB.
5) Free the harness from the wire saddle,
and remove the 9 screws [1]; then, de-
tach the control panel plate [2].
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON iR8500/7200 REV.1 AUG. 2001
CHAPTER 2 NEW FUNCTIONS
[1]
F02-1004-28
[1]
[2]
F02-1004-29
[1]
[1] [2]
F02-1004-30
[2] [1]
[3]
[5]
[4]
[1] [1]
[1] [1]
2-195