Installing The Server; Stabilize The Rack; Slide Rail Assembly Overview - Sun Oracle SPARC T3-1 Installation Manual

Installing the Server

These topics explain how to install the server in an equipment rack:
"Stabilize the Rack" on page 23
■
"Slide Rail Assembly Overview" on page 23
■
"Install the Screw-Mount Slide Rail Assemblies" on page 27
■
"Install the Snap-In Slide Rail Assemblies" on page 34
■
"Insert and Lock the Server in the Rack" on page 38
■
"Install the Cable Management Arm" on page 40
■
"Verify Correct Operation of the Slide Rails and the CMA" on page 44
■

▼ Stabilize the Rack

Your server rack should include an anti-tilt legs that prevent the rack from tipping
forward when a server is extended out of the rack.
●
Set the anti-tilt legs on the server rack before extending slide rails that are
supporting a server or before installing a server on extended rails.
See your rack's documentation for instructions.

Slide Rail Assembly Overview

The server can be installed with either of two types of rack mount kits:
Screw-mount (tooled) rack mount kit
■
Snap-in (tool-less) rack mount kit
■
23