Sun Oracle SPARC T3-1 Installation Manual page 4

Optional Component Installation 21
Installing the Server 23
▼
Slide Rail Assembly Overview 23
▼
▼
▼
▼
▼
Connecting the Server Cables 47
Cabling Requirements 47
▼
▼
▼
▼
▼
Cable Management Overview 53
▼
Powering On the Server For the First Time 55
Initial Power-On Tasks Overview 55
Oracle ILOM System Console Overview 56
▼
▼
▼
▼
iv SPARC T3-1 Server Installation Guide • March 2012
Stabilize the Rack 23
Slide-Rail Assembly Details for the Screw-Mount Rack Mount Kit 24
Slide Rail Assembly Details for the Snap-In Rack Mount Kit 26
Install the Screw-Mount Slide Rail Assemblies 27
Install the Snap-In Slide Rail Assemblies 34
Insert and Lock the Server in the Rack 38
Install the Cable Management Arm 40
Verify Correct Operation of the Slide Rails and the CMA 44
Connect the SER MGT Port Cable 49
Connect the NET MGT Port Cable 50
Connect the Ethernet Network Cables 51
Connect Other I/O Cables 51
Prepare the Power Cords 52
Secure the Server Cables in the CMA 53
Connect a Terminal or Emulator to the SER MGT Port 57
Power On the Server for the First Time 57
Verify System Functionality 59
Assign a Static IP Address to the Service Processor 60