Installing The Server Into A Rack With Slide-Rails; Before You Begin - Sun Oracle Fire X4470 Installation Manual

2
C H A P T E R
Installing the Server Into a Rack
With Slide-Rails
This chapter describes how to place the server into a rack using the rail assembly in
the rackmount kit. Perform these procedures if the rail assembly is purchased.
This chapter includes the following topics:
"Before You Begin" on page 13
■
"Rack Compatibility" on page 14
■
"Disassembling Slide-Rails" on page 16
■
"Installing the Mounting Brackets Onto the Server" on page 17
■
"Attaching the Slide-Rail Assemblies to the Rack" on page 19
■
"Installing the Server Into the Slide-Rail Assemblies" on page 22
■
"Installing the Cable Management Arm" on page 24
■
"Verifying Operation of the Slide-Rails and CMA" on page 29
■
Note - In this guide, the term rack means either an open rack or a closed cabinet.

Before You Begin

Read the following overview and see the service label on the top cover before you
begin to install the server into a rack.
13