The removable mounting bracket slides 14 in. (35.5 cm) out of the slide rail, then
■
locks in place. If you unlock the mounting bracket at this point, it slides an
additional 12 in. (30 cm) before separating from the slide rail.
That there are five locks in a slide rail assembly. Four are on the mounting bracket.
One lock is on the front section of the slide rail. The locks are described in
the Server" on page
23.
Locating the Locks on the Screw-Mount Slide Rail Assembly
FIGURE:
"Installing
Installing the Server
25
Need help?
Do you have a question about the SPARC T3-1 and is the answer not in the manual?
Questions and answers