Before Installing The Server; Checking Environmental Requirements - Sun Oracle SPARC Enterprise M9000 Installation Manual

When disconnecting a LAN cable, you may not be able to reach the connector lock with
■
your fingers. If that is the case, press the connector lock with a flathead screwdriver to
disconnect the cable. You could damage the PCI card if you force your fingers into the
gap rather than use a flathead screwdriver.
Do not place anything on the server or perform any work directly above it.
■
Do not allow the ambient temperature to rise sharply in winter. Such a sudden temperature
■
change would cause condensation to form inside the server. Allow for a sufficient warm-
up period prior to server operation.
Do not install the server near a copy machine, air conditioner, welding machine, or any
■
other loud equipment generating electronic noise.
Take measures to prevent static electricity from being generated at the installation
■
location. Note especially that static electricity is likely to be generated on carpets, and this
could lead to a malfunction.
Confirm that the supply voltage and frequency match the electrical ratings indicated on
■
the equipment.
Do not insert anything into any opening in the equipment. The equipment contains high-
■
voltage parts. If a metal object or another conductor were inserted into an opening in the
equipment, it may cause a short circuit that could cause fire, electric shock, or equipment
damage.
For details on maintenance of the server, contact a certified service engineer.
■
2.2

Before Installing the Server

Before installing the server, you must know the system configuration and obtain all the
prerequisite information for system installation. For details, see "Before Setting Up the
System," in the SPARC Enterprise M8000/M9000 Servers Site Planning Guide.
2.2.1

Checking Environmental Requirements

This section describes the ambient environmental requirements included in the installation
specifications of the server.
The environmental requirements vary depending on the sea level altitude at the installation
site, as indicated in
2-2 SPARC Enterprise M8000/M9000 Servers Installation Guide • October 2012
.
TABLE 2-1