Verify System Functionality - Sun Oracle SPARC T3-1 Installation Manual

8. Configure the OS by entering parameter values as prompted by a series of
onscreen instructions.
Tip – If you are not sure how to respond to a particular value, you can accept the
default and make changes at another time when the OS is running.
Note – You will be prompted to confirm the configuration multiple times. You will
be able to change parameter values if desired at each of these confirmation points.
9. (Optional) Deploy the server for its intended use.
Once the server has been configured and you have changed the default password,
the server is ready for normal use.
Related Information
"Connect a Terminal or Emulator to the SER MGT Port" on page 57
■
"Connecting the Server Cables" on page 47
■
"Assign a Static IP Address to the Service Processor" on page 60
■

▼ Verify System Functionality

●
After powering on the system for the first time, use the Sun Validation Test
Suite (Sun VTS) software to verify the functionality and performance of the
system, including network connections.
Refer to the Sun VTS documentation for instructions on running these test
utilities, available at:
http://www.oracle.com/pls/topic/lookup?ctx=E19719-01&id=
homepage
Powering On the Server For the First Time 59