Esd Precautions - Sun Oracle SPARC T3-1 Installation Manual

Caution – The server weighs approximately 60 lb (25. kg). Two people are required
to lift and mount the server into a rack.
Caution – When completing a two-person procedure, always communicate your
intentions clearly before, during, and after each step to minimize confusion.
Related Information
"ESD Precautions" on page 20
■

ESD Precautions

Electronic equipment is susceptible to damage by static electricity. Use a grounded
antistatic wriststrap, footstrap, or equivalent safety equipment to prevent
electrostatic damage (ESD) when you install or service the servers.
Caution – To protect electronic components from electrostatic damage, which can
permanently disable the system or require repair by service technicians, place
components on an antistatic surface, such as an antistatic discharge mat, an antistatic
bag, or a disposable antistatic mat. Wear an antistatic grounding strap connected to a
metal surface on the chassis when you work on system components.
Related Information
"Server Handling Precautions" on page 19
■
20 SPARC T3-1 Server Installation Guide • March 2012