Installing A Sun Netra T5440 Server Into A Rack - Sun Oracle Sun Netra T5440 Installation Manual

3
C H A P T E R
Installing a Sun Netra T5440 Server
Into a Rack
This chapter provides instructions for installing the Sun Netra T5440 server into a 4-
post or 2-post rack. Topics include:
"Rackmounting Options" on page 30
■
"Hardmounting the Server in a 19-Inch 4-Post Rack" on page 30
■
"Mounting the Server in a Sliding Rail 19-Inch 4-Post Rack" on page 35
■
"Hardmounting the Server in a 600 mm 4-Post Rack" on page 47
■
"Hardmounting the Server in a 23-Inch 2-Post Rack" on page 53
■
"Hardmounting the Server in a 19-Inch 2-Post Rack" on page 56
■
Note - The 19-inch 4-post hardmount rack kit is included in the standard
configuration of the Sun Netra T5440 server.
Note - References to left and right are from your viewpoint as you face either the
front or rear of the equipment.
Caution - The server is heavy. Two people are required to lift and mount the server
into a rack enclosure when following the procedures in this chapter.
29