Skoda Octavia Workshop Manual page 155

OCTAVIA
Edition 01.98
S00.5116.52.20
Gears/Hydraulic Control
K Fig. 1
- Use MP 3-491 to carefully press down spring
supporting disc sufficiently to allow the circlip
to be removed and installed, respectively.
Note:
Do not damage ball valve of clutch bell.
K Fig. 2
Circlip (arrow) should be located in the groove
of the clutch bell. Spring supporting disc should
be centred relative to hub.
Note:
Do not confuse groove with the shoulder on the
shaft.
Removing and installing circlip (ar-
row)
Inspecting fitting location of spring
supporting disc and circlip
38
------------ 38-9 ------------