Skoda Octavia Workshop Manual page 120

37
------------ ------------
Shift Mechanism/Housing
K - Grab turbine shaft and pull out all clutches
with supporting tube for -B2-, disks for -B2-,
springs and helical springs together.
Clutches -K1- and -K3- are pressed together.
-K1- need only be pressed away from -K3- if
one of the clutches must be disassembled or
replaced.
Pressing away -K1- from -K3- ⇒ page 37-40.
- Fitting park lock.
K - Insert a screwdriver through the bores of the
large sun wheel to release the screw for the
small drive shaft.
Note:
If the park lock cannot be fitted also block the
large drive shaft with a second screwdriver.
K - Remove screw -arrow- with washer and ad-
justing dial for the small drive shaft.
Axial needle bearing for planetary carrier re-
mains in gearbox/input gear.
- Remove small drive shaft.
OCTAVIA
Edition 12.98
S00.5116.55.20