Fault Finding Table - Skoda Octavia Workshop Manual

37
Specified main pressure in bar (MPa)
Main pressure
in bar (MPa)
After plugging in connector for solenoid valves, interrogate fault memory ⇒ page 01-6, and then erase
1)
fault memory ⇒ page 01-14.
Cause if pressure varies from specification
Possible cause
Idling speed too high
ATF pump faulty
Control valve in control valve body jamming
------------ 37-8 ------------
Shift Mechanism/Housing
Selector lever positions and test conditions
D
Idling
3.4...3.8
(0.34...0.38)
Connector for solenoid valve unplugged
R
Idling Engine speed
approx. 2000 rpm
5...6 12.2...13.2
(0.5...0.6) (1.22...1.32)
Remedy
Set engine
Test ATF pump, replace if necessary
Replace control valve body

Fault finding table

Before looking for the cause of the problem,
carry out the following steps:
♦ Check ATF level, top up if necessary
⇒ page 37-22
♦ Interrogate fault memory ⇒ page 01-6
♦ Read measured value block ⇒ page 01-16
♦ Rectify any electrical/electronic faults
⇒ page 01-29
OCTAVIA
D R
Engine speed
approx. 2000 rpm
23...24
(2.3...2.4)
Edition 04.00
S00.5116.58.20
1)