Skoda Octavia Workshop Manual page 161

OCTAVIA
Edition 04.98
S00.5116.53.20
Gears/Hydraulic Control
K Fig. 1
Pull out sealing plug before removing and in-
stalling the freewheel in the gearbox housing
otherwise the sealing plug and the O-ring will
be damaged.
- Fit O-rings onto the sealing plug.
- Insert sealing plug into the hole of the gear-
box housing -arrow-.
- The lug of the sealing plug is inserted into
the oil passage.
Removing and installing oil sump
Removing
- Place a collecting vessel below the gearbox.
K - Open ATF screw plug -2-.
- Unscrew overflow pipe -1- with a 5 mm hexa-
gon socket wrench.
- Allow ATF to flow out.
Note:
A residual quantity of ATF remains in the oil
sump.
- Unbolt guard plate at gearbox.
- Slacken bolts of oil sump diagonally across.
Installation
Note:
Clean magnet in the oil sump. Ensure the mag-
net is making contact with the oil sump over its
entire surface.
- Replace gaskets.
- Tighten bolts for oil sump diagonally across.
- Pour in ATF after repairs ⇒ page 37-25.
Inserting sealing plug
38
------------ 38-15 ------------