Skoda Octavia Workshop Manual page 127

OCTAVIA
Edition 12.98
S00.5116.55.20
Shift Mechanism/Housing
K - Install screw for small drive shaft -1- with
washer -2- and adjusting dial -3-, torque 30
Nm.
Notes:
♦ Position adjusting dial -3- on the small drive
shaft collar (arrow).
♦ Determine the thickness of the adjusting dial
⇒ set planet carrier, page 37-50.
- Perform check measurement of planet car-
rier ⇒ page 37-53.
K - Fit axial needle bearing with washer (1) on
the 3
- Wet the washer of the axial needle bear-
ing with ATF to ensure the bearing sticks
to -K3- during assembly.
K - Check piston ring seat on -K3-.
- Make sure the piston-ring joints interlock.
rd th
and 4 gear clutch -K3- (2).
37
------------ ------------